Integrated geophysical and geochemical study on AMD generation at the Haveri Au–Cu mine tailings,SW Finland

The Haveri tailings area contains 1.5 Mt of sulfide-bearing waste from the Au–Cu mine that operated during 1942–1961. Geophysical and geochemical methods were used to evaluate and characterize the generation of acid mine drainage (AMD). Correlations were examined among the electrical resistivity tomography (ERT) data, the total sulfide content and concentrations of sulfide-bound metals (Cu, Co, Fe, Mn, Ni, Pb and Zn) of tailings samples, and the resistivity and geochemistry of surface water. The resulting geophysical–geochemical model defines an area in the vadose tailings, where a low resistivity anomaly (<10 Ohm m) is correlated with the highest sulfide content, extensive sulfide oxidation and low pH (average 3.1). The physical and geochemical conditions, resulting from the oxidation of the sulfide minerals, suggest that the low resistivity anomaly is associated with acidic and metal-rich porewater (i.e., AMD). The lower resistivity values in the saturated zone of the central impoundment suggest the formation of a plume of AMD. The natural subsoil layer (silt and clay) and the bedrock surface below the tailings area were well mapped from the ERT data. The detected fracture zones of the bedrock that could work as leakage pathways for AMD were consistent with previous geological studies. The integrated methodology of the study offers a promising approach to fast and reliable monitoring of areas of potential AMD generation and its subsurface movement over large areas (ca. 9 ha). This methodology could be helpful in planning drill core sampling locations for geochemical and mineralogical analysis, groundwater sampling, and choosing and monitoring remedial programs.     

Particulate organic carbon (POC) in surface sediments of the Baltic Sea

In this study, particulate organic carbon (POC) contents and their distribution pattern in surficial sediments of the Baltic Sea are presented for 1,471 sampling stations. POC contents range from approx. 0.1% in shallow sandy areas up to 16% in deep muddy basins (e.g. Gotland Basin). Some novel relationships were identified between sediment mass physical properties (dry bulk density (DBD), grain size) and POC levels. Notably, the highest POC concentrations (about 10–17 mg cm^–3) occur in sandy mud to mud (60–100% mud content) with intermediate POC contents of about 3–7% and DBDs of 0.1–0.4 g cm^–3. Areas with this range in values seem to represent the optimum conditions for POC accumulation in the Baltic Sea. The maximum POC contents (8–16%) are found in fluid mud of the central Baltic Sea characterized by extremely low DBDs (<0.1 g cm^–3) and moderate POC concentrations (4–7 mg cm^–3). Furthermore, sediment mass accumulation rates (MAR), based on ²¹⁰Pb and ¹³⁷Cs measurements and available for 303 sites of the Baltic Sea, were used for assessing the spatial distribution of POC burial rates. Overall, these vary between 14 and 35 g m^–2 year^–1 in the mud depositional areas and, in total, at least 3.5 (±2.9) Mt POC are buried annually. Distribution patterns of POC contents and burial rates are not identical for the central Baltic Sea because of the low MAR in this area. The presented data characterize Baltic Sea sediments as an important sink for organic carbon. Regional differences in organic carbon deposition can be explained by the origin and transport pathways of POC, as well as the environmental conditions prevailing at the seafloor (morphology, currents, redox conditions). These findings can serve to improve budget calculations and modelling of the carbon cycle in this large brackish-water marginal sea.     

Genesis of Palaeoproterozoic iron skarns in the Misi region, northern Finland

Sodic alteration is widespread in Palaeoproterozoic greenstone and schist belts of the northern Fennoscandian shield. In the Misi region that forms the easternmost part of the Peräpohja schist belt, several small magnetite deposits show intimate spatial relationships with intensely albitised gabbros, raising the possibility that regional sodic alteration released iron, which was subsequently accumulated into deposits. Two of these magnetite deposits, Raajärvi and Puro display a typical paragenesis as follows (from oldest to youngest): (1) diopside, (2) actinolite/tremolite-magnetite ± chlorite, biotite, and (3) serpentine ± hematite, chlorite. Mass balance calculations suggest that significant amounts of Fe, Ca, Mg, K, Cu, V, and Ba were lost, and Na and Si gained during the albitisation of the gabbro, at near-constant Al, Ga, Ti, and Zr. Significant amounts of Si, Ca, Fe, and Na were enriched in the formation of skarn related to magnetite deposits. Fe and V leached from country rocks deposited during the skarn-alteration and formed the vanadium rich iron deposits while Cu passed through the system without significant precipitation due to low sulphur fugasity. Variations in Na, Ca, Mg, K, and Ba contents reflect the composition of the infiltrating fluid during alteration. Conventional heating-freezing measurements and proton-induced X-ray emission (PIXE) analyses of the fluid inclusions related to actinolite/tremolite-magnetite stage alteration indicate that the fluids that caused the alteration and the Fe-mineralisation were complex, oxidised, highly saline H₂O ± CO₂ fluids that contained high amounts of Na, Ca, K, Fe, and Ba as well as elevated concentrations of Cu, Zn, and Pb. The oxygen isotope thermometry suggest that temperature during the Fe-mineralisation stage was between 390 and 490°C. Calculated δ¹⁸O_fluid values of 6.1–9.8‰ SMOW and δ¹³C values of calcites in the ores and skarns were between ?7.7 and 10.9‰ PDB and most likely reflect admixture of ¹³C depleted, possibly magmatic fluids with the marble wall rocks that show δ¹³C_calcite values of 13‰ PDB. The SIMS U–Pb data on the zircons in the albitised gabbro next to the Raajärvi and Puro deposits suggest that intrusion of the gabbro took place at 2123±7 Ma and was accompanied by the formation of diopside skarn. The TIMS data on the metasomatic titanites related to sodic alteration yielded ages of 2062±3 and 2017±3 Ma. Iron was probably stripped from the mafic country rocks by sodic alteration between 2123 and 2017 Ma, driven by repeated brine influxes. Subsequently, the metal-rich brine was focused by a fault system and the iron was precipitated from this fluid by a combination of wall rock reaction, fluid mixing, and a drop in the temperature.     

Spatio‐temporal patterns of major ions in urban stormwater under cold climate

Multiple natural and anthropogenic factors affect urban water chemistry. However, little is known about the abundance or temporal variation of major ions in urban runoff. This study explores the spatio‐temporal variation of major dissolved ions (Na, K, Ca, Mg, Cl, NO₃, and SO₄) and total dissolved solids (TDS) in cold climate urban stormwater. Three watersheds with varying degrees of urban land use intensity and imperviousness (from 36% to 66%) in Helsinki, Finland, were continuously monitored for 5 years using an automated sampling procedure to obtain stormwater discharge and ion concentrations and, thus, loadings. High‐resolution datasets, including long‐term continuous discharge, both measured and simulated (using Storm Water Management Model), and automatic water quality sampling enabled the accurate calculation of loads of ions and TDS. Water quality was related to explanatory watershed characteristics (e.g., watershed physiography and sampling time) using hierarchical clustering, nonmetric multidimensional scaling, and hierarchical partitioning methods. Urban land use contributed to increased ion concentrations and loads year‐round. This study highlights how stormwater ion concentrations are elevated across seasons, indicating chronic pollution phenomena. The greatest loads occurred during summer (except for Na and Cl), while the highest variation in loads was observed in autumn. Significant clusters among ions were found in the hierarchical cluster analysis, suggesting similar temporal patterns and sources for the ions in each cluster. The importance of land use was evident, though in the most urbanized watershed, concentrations were not linked to any of the investigated watershed characteristics. Based on our results, only Na and Cl are manageable by alternative winter road antiskid practices, whereas other ions resulted from diffuse pollution sources, being therefore more difficult to control. Finally, this study contributes to an increased understanding of the temporal and spatial patterns of ions in stormwater and highlights the need for consistent time series data for ion monitoring under cold climatic conditions in order to enable reliable estimates of their loads to adjacent water bodies. Finally, year‐round stormwater treatment is highly recommended.     

Heavy metals and high pup mortality in the Saimaa ringed seal population in eastern Finland

Hair nickel, mercury, cadmium, lead and chromium concentrations were measured from still-born ringed seal pups and from other ringed seal groups from Lake Saimaa in Finland. Nickel concentration was significantly higher in the hair samples of still-born pups as compared to live-born pups and to adult seals. There was assumed to be some connection between the stillbirth of the pups and nickel concentration of the hair. Mercury concentration of the natal hair of pups was significantly higher than the mercury concentration of the first adult hair but no clear connection between stillbirth and mercury pollution was observed. No differences were observed in cadmium, lead and chromium concentrations of the hair of still-born and other ringed seal groups.     

Spatial structure of standing wave electromagnetic fields at the lower harmonics of the ionospheric Alfvén resonator

During the multiband wave Pc1 event on March 7, 2001 the EISCAT UHF and VHF incoherent scatter radars operated simultaneously covering an exceptionally wide altitude range of the ionosphere ～90—2000 km. This made possible to test the ionospheric Alfvén resonator (IAR) model over a large altitude range. The three lowest IAR eigenfrequencies, where the most of the Pc1 pulsation signal bands occur, were selected for the spatial analysis of the standing wave electromagnetic fields, applying the full-wave numerical simulation method. The altitude spread of amplitude maxima and nodes together with polarization characteristics of oscillation maxima in the horizontal plane are presented. The comparison of the standing wave oscillations on the altitude profile with the signal amplitude observed on the ground is also presented.     

A comparative Pc1 case study applying two modes of ionospheric Alfvén resonator modeling

The case study of four Pc1 subauroral pulsation events from Finland has been carried out on the basis of the full-wave numerical method. This method has been applied to simultaneous Scandinavian EISCAT radar measurements of the ionospheric plasma parameters, and their vertical (altitude) profiles have been utilized. Two alternative plasma profiles with different ion composition displays have been put to the test. A comparison between both types of the modeled ionospheric Alfvén resonator (IAR) ground signal frequency response and the frequency range of the Pc1 signal records has been studied. The results of the applied method can illustrate possible quiescent or disturbance changes in the upper ionosphere above the dense F2 layer. The ionospheric region up to ∼ 2000 km has been taken into account for this comparative analysis.